STENHOJ MARINE COMPRESSOR
Stenhoj manufactures and supplies efficient and highly reliable compressors, dryers, industrial filters and condensate drains.
STENHOJ COMPRESSORS
ESHPHOLIN H 6 Series Compressor
The ESPHOLIN H-Compressor is a twin stage V-unit, with the air-cooled inter-cooler located between the cylinders. The air is drawn in on the low-pressure side through an efficient air filter, passing through the air-cooled intercooler to the high pressure cylinder to the final working pressure.Stenhoj Compressors are designed for use by Marine Industry for ship & ocean going vessels.The compressor is available with the following operating automation:
- Fully automatic operation
- with the help of a pressostat, which starts and stops the compressor.
- Semi-automatic operation the compressor is started and the pressostat then controls the magnetic valve, thus alternating between pressure/no pressure.
- Combined operation of the two previous operation types using a change-over switch.
- Stationary Compressors
- Stationary Compressor units are available in various configurations for 10 bar and 15 bar.
SCREW COMPRESSORS
S-Series model from 07-22 kW fixed and regulated speed
The new design of the high efficiency airend operates at low rotational speeds, and as a result lowers energy costs. The innovative integrated design, with oil separation, oil filter, thermostatic bypass valve, reduces the number of external hoses and components resulting in increased reliability.
Tried and tested inverter concept Integrated in the electric cabinet.
High efficiency drive motor IP55 motor for operational reliability.
Tried and tested inverter concept Integrated in the electric cabinet.
High efficiency drive motor IP55 motor for operational reliability.
.PNG)
S-Series model from 23-29 kW fixed and regulated speed
The high output compression element with slow rotational speed reduces energy costs. In addition to this, the innovative design of the fail safe shaft seal, integrated oil filter and oil regulation valve, ensures external hoses are reduced to a mini-mum to guarantee the highest levels of quality and reliability are achieved.
Large surface after cooler, Optimum cooling to ensure low operating and discharge temperatures.
Tried and tested inverter concept Integrated in the electric cabinet.
Large surface after cooler, Optimum cooling to ensure low operating and discharge temperatures.
Tried and tested inverter concept Integrated in the electric cabinet.
S-Series model from 30-132 kW fixed and regulated speed
The high output compression element with slow rotational speed reduces energy costs. In addition to this, the innovative design of the fail safe shaft seal, integrated oil filter and oil regulation valve, ensures external hoses are reduced to a mini-mum to guarantee the highest levels of quality and reliability are achieved.
Large surface after cooler
Optimum cooling to ensure low operating and discharge temperatures.
Tried and tested inverter concept
Integrated in the electric cabinet.
Large surface after cooler
Optimum cooling to ensure low operating and discharge temperatures.
Tried and tested inverter concept
Integrated in the electric cabinet.
S-Series AirPack model from 07-22 kW fixed and regulated speed
The new design of the high efficiency airend operates at low rotational speeds, and as a result lowers energy costs. The innovative integrated design, with oil separation, oil filter, thermostatic bypass valve, reduces the number of external hoses and components resulting in increased reliability. Tried and tested inverter concept Integrated in the electric cabinet. High efficiency drive motor IP55 motor for operational reliability.
DRYERS
Adsorption Dryers
Drying of small and medium volume flows especially require an economical solution. Required are dryers, which distinguished features are low investment and running costs.
STENOPAC 2000 adsorption dryer makes the advantages of big dryers also for small and medium volume flows available.
STENOPAC 2000 is equipped with pre-and after filters and with the electronically level controlled drain. Guaranteed pure, dry and oil free compressed air –and no loss of compressed air from condensate drainage.
STENOPAC 2000 adsorption dryer makes the advantages of big dryers also for small and medium volume flows available.
STENOPAC 2000 is equipped with pre-and after filters and with the electronically level controlled drain. Guaranteed pure, dry and oil free compressed air –and no loss of compressed air from condensate drainage.
Fridge Dryer
For the treatment of compressed air we recommend using STENHØJ’s compact fridge dryer with built in water separator and a very high efficiency.
The fridge dryer is applied to remove the condensate in order to secure a low dew point in the compressed air.
STENHØJ’s fridge dryer is equipped with a heat exchanger made of aluminium and with 3 functionalities: Air to air heat exchanger, air to cooling agent exchanger and separator for the condensate. The fridge dryer does not shut down until a dew point temperature of above +20 degrees C.
The fridge dryer is applied to remove the condensate in order to secure a low dew point in the compressed air.
STENHØJ’s fridge dryer is equipped with a heat exchanger made of aluminium and with 3 functionalities: Air to air heat exchanger, air to cooling agent exchanger and separator for the condensate. The fridge dryer does not shut down until a dew point temperature of above +20 degrees C.
INDUSTRIAL FILTERS & CONDENSATE DRAINS
Cyclone and Industrial filters
The STENHØJ Cyclone water separator is used to eliminate water droplets from the compressed air system. Its purely mechanical function, its fluid mechanically optimized housing and its efficient condensate drain form the basis for its long and trouble free service-life.
The STENHØJ cyclone is equipped with a timer controlled drain.
The SF filter series is designed to cover industry’s filtration requirements in countless different processes using compressed air and gases.
The STENHØJ cyclone is equipped with a timer controlled drain.
The SF filter series is designed to cover industry’s filtration requirements in countless different processes using compressed air and gases.
Stenhøj BEKOMAT -Condensate drain
STENHØJ BEKOMAT is characterized by reliability, fast and smooth installation, and maintenance with minimum time requirements. This is achieved through an innovative construction which consists of only 2 or 3 units with quick release connectors. This means STENHØJ BEKOMAT can be serviced fast without decoupling from the electrical outlet.
STENHØJ BEKOMAT saves energy as it discharges according to demand. The housing is made of aluminium for high durability and the unit is sensor-controlled. G-5N91XFMY7F
STENHØJ BEKOMAT saves energy as it discharges according to demand. The housing is made of aluminium for high durability and the unit is sensor-controlled. G-5N91XFMY7F
.png)
Headland Engineering
It all starts with one quick, no-obligation conversation!