R & D MARINE - MARINE ENGINE MOUNTS & COUPLINGS
It all starts with one quick, no-obligation conversation!
Call us: +61 2 9939 1966EMAIL : info@headlandengineering.com.au
Call us: +61 2 9939 1966EMAIL : info@headlandengineering.com.au
R & D Marine was started in 1973 after several years of development work and now has 8000 square feet of modern factory space with all manufacturing being carried out on CNC machines.
The basis of the product range had been established and since then it has grown to the comprehensive range we have today of couplings, mountings, damper drive plates and half couplings for engines from 5 H.P. to 800 H.P.
The basis of the product range had been established and since then it has grown to the comprehensive range we have today of couplings, mountings, damper drive plates and half couplings for engines from 5 H.P. to 800 H.P.
R & D Marine Engine mounts:
R & D Marine has developed a comprehensive range of fail safe competitively priced Engine Mountings to fit all major installations for boats, sailboats and various marine applications.Shear engine mounts for boats mountings are available where good isolation is required and compression boat/marine engine mounts where there is a restriction on the available space.Installation is made as quick and easy as possible with slotted holes and height adjusting studs to simplify alignment.Flexible Engine Mounts for Yanmar, Volvo, Beta, Bukh, Cummins, Vetus engines. Mounts for Yanmar 1GM10, 3YM30, 3YM20, 3JH4E, 3JH2E, 4JH2DTE, 4JH5E, 4JH3E, 4JH4E, 2GM20, 3GM30F, ETCCapacity 30 - 2000 lbs per mount
- Good vibration isolation
- Fail safe design
- Will withstand roll over test
- Competitively priced
- Wide range of stock
- Available in standard sizes
- Accepts propeller thrust
- Pre-loaded
- Slotted holes to assist alignment
- Height adjusting to simplify alignment
- Fast installation time
- Worldwide availability
For more information please download PDF brochure below
Below Data is required to select boat / marine Engine Mount:1. Weight of Engine including gear box2. Suitable distance between holes on mounting base of mount3. Size of the Stud on the engine mount.4. Engine model no. can help in confirming fitment of the engine mount.
5. Yanmar engine mounts are usually selected based on the engine model no.Information can be provided to us via email or phone call.
6. Yanmar Engine mounts Y 75, Y100, Y150, Y200 are available.
7. Yanmar mounts Y50 and Y70 are also available.
Please download brochure for technical details.
Below Data is required to select flexible Coupling :1. Horse Power (H.P.) of Engine2. RPM/ Speed of Engine3. Reduction Ratio of the Gear Box 4. No of bolt holes on the gear box flange5. Outer diameter of Gear Box flange6. Size of holes on Gear box flange7. PCD or the distance between opposite holes on Gear Box flange8. Gear Box model no. can help in confirming fitment of the felxible Coupling.
9. Flexible coupling to fit Yanmar, Volvo penta, Bukh, SOLE and Nanni Diesel are also available in stock.Information can be provided to us via email or phone call.
Please download brochure for technical details.
R & D Marine Flexible Coupling
R & D Marine has developed a wide range of competitively priced Flexible Couplings to fit all major installations on boats and marine applications.The R & D Flexible Couplings reduce engine noise, vibration transmission and are designed to accept propeller thrust, a separate thrust bearing and bulk head are not required.The boat/marine engine couplings are made from a polyester elastomer which is not affected by salt water, diesel and lubrication fluids.If electrical continuity is required an earthing connector can be fitted in the centre of most boat and marine Flexible Couplings.Installation is quick and easy as the R & D Coupling requires no machining and comes supplied with bolts to connect between the two existing shaft flanges.Checking alignment on installation and during service checks is quick and easy using the red cone headed bolt.Products are available ex-stock and worldwide through our distribution network.For Yanmar, Twin Disc, ZF Hurth, Bukh, Nanni Diesel, Technodrive, Volvo, Newage PRM, Borg Warner applicationFor engines 5 to 1500 HP
- Reduces engine noise and vibration transmission
- Fail safe design
- Bolts between existing shaft flanges
- Requires no machining
- Simple to install
- Simple to periodically check alignment
- Wide range of stock
- Accepts propeller thrust
- Impervious to salt water, diesel and lubrication oils
- Fast installation time
- Electrical continuity available
- Worldwide availability
- Competitively priced
R & D Marine Damper Plate
- R & D Marine has developed a wide range of competitively priced Damper Drive Plates to fit most engine/gearbox combinations mostly ues in boat/ sailboat and marine applications. The R & D Damper Drive Plates reduce gear noise and allow the engine to run at lower speeds. Linear Stiffness elements for general applications and High-Deflection elements to stop gear noise and spline wear at slow speeds. All dampers are designed to be Fail-Safe and maintain the drive if the flexible element fails.The flexible elements are made from a Polyester Elastomer which has good heat qualities and is not affected by salt water, diesel and lubrication oils. Non-standard items are available for special installations, maximum back plate diameter of 533mm (21.0"). Installation is made quick and easy as the R & D Damper Drive Plate requires no machining and is ready to bolt to the flywheel. Products are available ex-stock and worldwide through our distribution network.
- For engines up to 800 HP
- Torque range 60-1400 lb ft
- Reduces gear noise
- Allows engine to run at lower speeds
- Fail safe design
- Machined ready to install
- Elements suitable for every application
- Element has good heat qualities
- Special back plates up to 533mm (21.0") diameter
- Element is impervious to salt water, diesel and lubrication oils
- Wide range of stock
- Competitively priced
- No springs to rust or fret
- Worldwide availability
Below Data is required to select Damper Plate:
1. Horse Power (H.P.) of Engine
2. RPM/ Speed of Engine
3. No. of Splines/ Teeth on the spline shaft
4. Diameter of spline shaft
5. Outer diameter of Backing plate
6. No. of holes on backing plate
7. PCD or the distance between opposite holes on back plate
8. Gear Box model no. can help in confirming fitment of the Damper Plate.
9. Damper plates for BorG warner, Newage PRM, Paragon. Parsons, Self Change Gear, Technodrive, TMP, Twin Disc, Yanmar and ZF Hurth are available.
Information can be provided to us via email or phone call.
Please download brochure for technical details.
Below Data is required to select Propeller Shaft Coupling :1. Diameter of the Gear Box flange
2. PCD of the holes on the Gear Box Flange
3. Diameter of the register on the Gear Box Flange
4. Propeller Shaft diamter .
5. Coupling to fit Yanmar, Volvo penta, Bukh, SOLE and Nanni Diesel are also available. Information can be provided to us via email or phone call.Please download brochure for technical details. Information can be provided to us via email or phone call.
R & D MARINE Steel Shaft Couplings
- R & D Marine has developed a comprehensive range of competitively priced Steel Clamp Half Couplings with flange sizes from 4 to 7 1/4 inch diameter. Steel Clamp Half Couplings for boat/marine application can accommodate the variations that occur with normal shaft tolerances, are easy to install and can be adjusted to the required position on the shaft. R & D Marine have the capacity to machine Split Half Couplings to special sizes not in the literature. R & D Marine can also offer pilot drilled Solid Half Couplings suitable for parallel and taper boring. Adaptors to fit larger couplings to gearbox flanges and Bobbins to extend the shaft. Products are available ex-stock and worldwide through our distribution network.
- Clamps to give a better fit than a solid coupling:
- Machined from solid steel
- Able to accommodate normal shaft tolerances
- Available in standard sizes (Both Metric and Imperial)
- Easy to install and position
- Wide range of stock
- Competitively priced
- In - House customization
- Special Half Couplings can be supplied in small batches
- Worldwide availability
R & D Marine Rope Cutter
- Unique design to stop ropes jamming between the cutlass bearing and rope cutter
- Smooth cutting action which avoids vibrations or shock commonly associated with scissor style cutters
- Radial and axial holes in the cutter allow water to flow through the cutlass bearing
- Minimal interference to water flow and propeller performance
- Made of 316 Stainless Steel
- No moving parts to service or fail
- Installs in minutes with minimum of tools
- Includes bolts, hexagon wrenches, drill, thread lock and full fitting instructions
Get in Touch
MESSAGE ALERT : MESSAGES WITH INCORRECT AND UNVERIFABLE EMAIL ADDRESS ARE AUTOMATICALY SENT TO QUARANTINE /SPAM FOLDER ARE NOT RECIEVED TO OUR INBOX
G-5N91XFMY7F
Address
UNIT 23, 19-26 DURIAN PL, WETHERILL PARK NSW 2164 AUSTRALIA
Headland Engineering
It all starts with one quick, no-obligation conversation!